| |
|
|
|
|
For
more product information please click on an image. |
| |
|
|
Value Faucets |
| |
|
| |
The Value Faucets are the best alternative to upgrade the existing basic faucets at your home. The Value Faucets are a unique quarter turn faucet that comes in two designs and six different finishes. These faucets are NSF approved and are lead-free.
Common Features:
• Elegant design complements today’s high-end kitchens
• NSF listed to ANSI NSF Std. 61 and is lead free
• Retrofits most brands
• Internal ceramic disc provides smooth operation
• High Neck Design which swivels 360°
• Lever style quarter turn handle
• All mounting hardware is included
• Available in two designs, six different finishes
• Two-year warranty
Series 888 Specifications
• Overall Height of 11.5" (292 mm)
• Swivels Easily, 360°
• Spout Reach: 5.7" (146 mm)
• Mounting Hole Diameter: ½" (12.5 mm)
• Base Diameter: 1.73" (44 mm)
• Connection*: ¼" compression nut fitting
• Operating pressure: 125 psi/8.3 bar
• Flow Rate: 1.0 gpm/3.785 lpm at 35 PSI/2.32 BAR
• Temperature Rating: 4°C/40°F to 70°C/158°F |
|
Series 905 Specifications
• Overall Height of 11.075" (281.32 mm)
• Swivels Easily, 360°
• Spout Reach: 4.75" (120 mm)
• Mounting Hole Diameter: ½" (12.5 mm)
• Base Diameter: 1.76 (44.8 mm)
• Connection*: ¼" compression nut fitting
• Operating pressure: 125 psi/8.3 bar
• Flow Rate: 1.0 gpm/3.785 lpm at 35 PSI/2.32 BAR
• Temperature Rating: 4°C/40°F to 70°C/158°F |
|
| |
Shower Filters |
| |
|
| |
The shower filters are available in two models: - Hand-Held and Wall Mount. There is also a Replacement Cartridge Filter available.
Hand Held Shower Filter: This filter has a convenient handheld design
Wall Mount Shower Filter: This filter is a compact wall mount design
Features and Specifications:
• 10,000 Gallon Integrated Handheld
• 5-function massage head
• Convenient handheld design
• Reduces over 98% Chlorine
• Reduces Hydrogen Sulfide
• Eliminates Odor
• No calcium or soap scum build-up on shower glass doors or tile
• Restores natural softness to skin, scalp and hair by removing harsh, drying chemicals from the water
• Easy to clean
• Easy installation - No tools required!
• Easy to install replacement cartridges
• The shower filter cartridge uses KDF, a special water treatment media, to reduce chlorine, and the smell/ odor of chlorine
• Tested and Certified by NSF International to NSF/ANSI Standard 177 for the reduction of free available Chlorine. |
| |
Waterproof pH Pens |
|
|
deal for all pH testing, water purification applications, wastewater regulation, aquaculture, hydroponics, colloidal silver, labs & scientific testing, pools & spas, ecology testing, boilers & cooling towers, water treatment, wine, coffee, agriculture and more.
Features
• Measures pH and Temperature
• Auto-ranging three point calibration with digital fine tuning
• Includes 4 pH buffer solution in a sponge embedded in a clear cap
• Waterproof housing (IP-67 rating)
• Simultaneous temperature display
• Measurement Range: 0-14 pH
• Digital automatic calibration (one point), with digital fine tuning
• Auto-off function, data-hold function and low-battery indicator
• Display: large and easy-to-read LCD screen includes simultaneous temperature
reading
• Factory Calibrated: The PH-200 meter is three-point factory calibrated to 4,
7, and 10 pH. The meter can be recalibrated with digital calibration using the
push buttons, rather than a screwdriver.
• Includes a cap, batteries, lanyard, and pH 7.0 buffer
• Warranty: 1 Year |
|
| |
TDS-3 Meters |
|
|
The TDS-3
Handheld Meter is very affordable and comes with a carrying case. It easily fits in
your pocket. This meter is ideal for all water purification applications for both
consumer and commercial use.
Features
• LeakLogic RISC based management - state of the art microchip technology for sensitive controls, operation verification and long battery life
• Ideal for commercial use. Includes a carrying case with
belt clip.
• Highly efficient and accurate due to its advanced
microprocessor technology.
• Hold Function: saves measurements for convenient
reading and recording.
• Auto-off function: the meter shuts off automatically after
10 minutes of non-use to conserve batteries.
• Measurement Range: 0-9990 ppm. From 0-999 ppm, the
resolution is in increments of 1ppm. From 1000 to 9990
ppm, the resolution is in increments of 10ppm, indicated
by a blinking 'x10' image.
• Built-in digital thermometer
• Display: large and easy-to-read LCD screen.
• Factory Calibrated: the meters are calibrated with a 342
ppm NaCl solution. Meters can be recalibrated with a miniscrewdriver.
• Very Affordable
• Warranty: 3 Years |
|
| |
|
PURA Point-of-Use Coolers |
| |
|
|
| |
|
Why choose PURA coolers?
PURA Coolers save money!
It takes significantly less money to own and maintain a PURA® cooler than purchasing bottled water. Its like having the water bottling plant right in the office or home.
PURA Coolers are healthy!
Our bodies are made up mainly of water and some common beverages such as soda and coffee can actually dehydrate the body. Water is the best choice for staying hydrated and a PURA bottle-free cooler can supply a virtually unlimited volume of quality hot and cold drinking water
PURA Coolers save time!
By installing a PURA cooler, you no longer have to deal with invoices, deliveries, bottle storage or empty bottles cluttering up your work place.
PURA Coolers are safer!
Bottle-less coolers are safe for everyone as they prevent water spills from lifting heavy water bottles, which can also cause back strain which results in worker compensation claims.
PURA Coolers are greener!
Bottle-less coolers eliminate small pack water bottles from being discarded into the landfill and reduce the fuel used to deliver 5 gallon bottles to the office or home every week.
Please contact customer service for current pricing and stock status. |
|
|
|
|
|
|
John Guest PI Range
Fittings now available (Canada Only) |
| |
|
| |
John Guest PI Range of quick connect fittings are now available for your fluid connection needs. The PI Range of inch-size push-in fittings is offered for tube sizes 5/32" O.D. to 5/8" O.D. The fittings are manufactured in gray acetal copolymer with food grade nitrile ‘o’ ring, making them especially suitable for applications involving foodstuff and potable liquids. They are equally suitable for air and inert gasses and can therefore be used on CO2 lines, pneumatic applications, and vacuum.
Please contact customer service for current pricing and stock status. |
|
|
|
|
|
