|
Enjoy
Unlimited Soft Water Supply
Durosoft
9100SXT TMI is ideal for residential applications requiring
an uninterrupted supply of soft water. It is also ideal
to meet unusually high soft water demands and extreme hardness
conditions.
Durosoft
9100SXT TMI consists of four major components: two identical
mineral tanks containing ion exchange resin to soften hard
water - one in "service" and the other in "reserve";
a brine tank which produces a measured amount of salt water
brine for each regeneration cycle; and a meter initiated
composite electronic control valve which governs the operation
of the system.
Durosoft
9100SXT TMI contains a bed of ion exchange resin beads. As
water passes through the bed, calcium and magnesium - the
hardness minerals - are removed and held by the resin. Eventually,
the resin beads become saturated with hardness minerals
and must be regenerated. The control valve meter is set
to the volume of water one mineral tank can soften before
its capacity is exhausted. When the pre-set volume is reached,
the control valve diverts the incoming water supply from
the "service" tank to the "reserve"
tank and soft water service is maintained while the exhausted
tank is regenerated. A brine solution is drawn into the
resin bed to release the accumulated minerals. The minerals
and brine are rinsed away with fresh water and the regenerated
resin is ready to soften water again.
Features
• Control with a seven year guarantee
• Heavy duty brine tanks and mineral tanks with a lifetime guarantee
• Integral super-cap power back up.
• Larger, back-lit display with additional characters and information icons.
• Updated user interface with more intuitive controls and programming codes.
• New diagnostic view that displays flow rate, peak flow rate, hours in service, volume used, reserve capacity settings, and software version
• Easier to troubleshoot by technicians
• Improved regeneration display
• Unit displays abbreviations for the specific regeneration steps instead of the step number
• Unit shows minutes and seconds remaining for each regeneration step instead of just minutes
• Addition of the "Day of Week" control type option
• Improved time of day functionality
• Flow Indicator flashes when outlet flow is detected.
• Service Icon flashes if a regeneration cycle has been queued
View
brochure
View
WQA Approved manual
For WQA Certified models, please visit the following link:
http://wqa.org/goldseal/detail.cfm?tableDefID=27&companyID=6021
View
Fleck 9100 manual
View Fleck
SXT manual
View
installation drawing
 |
