|
Unlimited
soft water supply...
24 hours a day, 7 days a week
In a
class by itself, TMI is engineered for the most demanding
light commercial and heavy residential needs.
All
water softeners require periodic regeneration when their
softening capacity is exhausted. Conventional softeners
can allow hard water to bypass the softener during regeneration.
The
TMI Series features a twin mineral tank system governed
by a meter initiated control valve. One softener tank is
in service, delivering soft water, while the second softener
tank is held in reserve. When the softening capacity of
the service tank is exhausted, the control valve automatically
switches the water flow to the reserve tank. The exhausted
tank regenerates immediately and then becomes the reserve.
This ensures a continuous supply of soft water without the
risk of hard water getting into the service flow, making
the TMI Series ideal for feed water pretreatment of commercial
and industrial reverse osmosis systems.
Technical
Specifications & Features
•
Recommended maximum operating
pressure: 100 psig (690 kPa)
•
Recommended maximum operating
temperature: 100°F (38°C)
Main
Control Valve
•
Single valve per system (two tanks) controls all softener functions
•
Electro-mechanical timer controls all valve cycles including service, backwash, brine draw, slow rinse, fast rinse and brine tank refill
• Meter initated regeneration
• 9000 and 9500 control valves constructed of lead-free brass*; 9100 control valve constructed of fiber reinforced polymer
• Main piston is also lead-free* brass with a Teflon coating
•
Simple threaded (NPT) inlet, outlet and drain connections
• CSA certified valves (in Canada, except 9100 which uses a 24VAC Class 2, certified transformer)
Optional Features
• 9100 control valve
• Electronic controller (XT or SXT)
• Brine tank safety float
• Optional brine tank sizes
• Sodium Chloride Dealkalizer anion resin systems (DTMI Systems)
Resin
• Premium quality ion exchange softening resin,
selected for resistance to fouling and minimum salt usage
• FDA Grade
Softener
Tanks and Internals
• Seamless polyethylene liner wrapped with a
continuous filament wound/epoxy resin fiberglass shell
• PVC hub/lateral flow distributor and riser
tube with washed quartz support bed
• Tanks up to and including 24" diameter
are manufactured by WaterGroup Companies Inc. in Canada
• Brine tanks are one piece rotationally molded
polyethylene with lid, air check valve assembly, brine well
and grid assembly
*As
defined under Section 1417(d) of the U.S.E.P.A. Safe Drinking
Water Act
View
brochure
View
System Selection
View
TMI Specifications
View
Fleck Manual
View
Fleck SXT manual
|
