|
The
WaterGroup WGR Series Commercial Reverse Osmosis Systems
remove up to 99% of the total dissolved solids (TDS) in
raw commercial feedwater, producing high quality process
water for applications such as:
•
Boiler Feed
•
Humidification Systems
•
Drinking Water
•
Industrial Processes
•
Food and Beverage Processing
•
Spot Free Rinse
Standard
Features
Membrane:
advanced thin film composite for maximum rejection of impurities.
Membrane
Housing: standard stainless steel housings.
Process
Pump: direct coupled brass rotary vane type designed
for continuous high pressure service.
Frame:
corrosion resistant powder coated steel.
Pre-Sediment
Filter: 5 micron rated filter for removal of sediment
and protection of system.
Pre-Carbon
Filter: granular activated radial flow carbon filter
for removal of chlorine must be replaced regularly.
Pre-Filter
Isolation Valve: convenient shut off valve for easy
filter replacement.
Pressure
Gauges: high quality 2.5" liquid filled process
pressure gauge for monitoring operating pressure. 1"
dry pressure gauges for monitoring filter operation.
Low
Pressure Cut-Out: insufficient feed water will automatically
shut the system down protecting the process pump.
Tank
Full Switch: R.O. system will automatically start when
tank pressure falls below 30 psi and stop when pressure
reaches 50 psi.
Simple
Maintenance/Inspection: all WGR series components are
strategically located on the frame for easy access and inspection.
Optional
Features
Float
Switch: mechanical float switch for open storage applications.
View
brochure
Consultez
brochure
View
manual
|
