|
Freshpoint™
Ultrafiltration System
•
Designed for cyst reduction, turbidity, and fine sediment
filtration applications
• > 98% reduction of 0.025 micron (25 nanometer)
particles*
• > 99.99% (> 4 Log) reduction of 0.065 micron
(65 nanometer) particles*
• Forward-flush and back-flush cleaning cycles provide
extended filter life in a wide range of applications
• Proprietary hollow-fiber ultrafiltration membrane
• Professional-grade housing, controller and flush
valve
• Metered self-cleaning cycle flushes only when needed
• Day override feature flushes module daily with fresh
water when system is not in use
• Peak flow rates up to 10 gpm (2271 L/h)
* Performance
based on MS-2 (25 nm) and PRD-1 (65 nm) virus particle tests.
Data available upon request.
The
PENTEK® FreshPoint™ Ultrafiltration System provides
complete point-of-entry (POE) filtration proven to reduce
turbidity, particulates and cysts for safer, cleaner water
at every tap. The system employs hollow-fiber Ultrafiltration
membrane technology to filter impurities as small as 0.025
microns.
To maximize
membrane capacity and service life, a metered flushing cycle
is controlled using an advanced controller and high-performance
turbine meter. The self-cleaning forward and back-flush
cycles are initiated when the programmed capacity of the
membrane is reached. During the backwash, flow is reversed
and particles are ejected from the pores of the membrane
and flushed to drain. In the forward- flush cycle, service
water passes through the capillaries at a high speed, scouring
particles from the membrane surface and rinsing them from
the system. Since power is only required to flush the system,
outages and interruptions will not jeopardize the integrity
of membrane or its ability to provide safer, cleaner water.
The
advanced electronic controller provides a programmable day
override which allows the unit to flush every day with fresh
water when the system is not in use. Critical system diagnostics,
including totalized flow, instantaneous flow rate, and previous
days water usage, are available to optimize flushing cycles
and monitor performance.
The
high-performance industrial fiberglass housing is pressure
rated to 300 psi. Inside the housing, the membrane is sealed
with double radial o-rings, minimizing the potential for
leak paths. Quick-connect end caps allow the membrane to
easily be removed for cleaning or replacement.
The
system can be applied to solve “known” water problems
including high turbidity, suspended solids, and certain
microbiological contaminants. It can also serve as a flushable
prefilter to extend the life of media filters downstream.
View
brochure in Adobe Acrobat
View
Systems and Accessories in Adobe Acrobat
View
manual in Adobe Acrobat
(This manual is large
and will take some time to
download)
|
